MTI-8-0I-DK
Development kit, MTi-8 GNSS/INS, Sensor, Accelerometer / Gyroscope / Magnetometer - Three-Axis
| ผู้ผลิต | XSENS |
|---|---|
| หมายเลขชิ้นส่วนของผู้ผลิต | MTI-8-0I-DKสำเนา |
| ระยะเวลานำส่งมาตรฐานของผู้ผลิต | 6 สัปดาห์ |
| รหัสสินค้า | 4061357 |
| หมายเลขชิ้นส่วนของคุณ | |
| เอกสารข้อมูลทางเทคนิค |
อยากได้เพิ่มใช่ไหม
| จำนวน | ราคา (ราคาสินค้าไม่รวม vat) |
|---|---|
| 1+ | THB29,618.710 |
ข้อมูลผลิตภัณฑ์
| ผู้ผลิต | XSENS |
|---|---|
| หมายเลขชิ้นส่วนของผู้ผลิต | MTI-8-0I-DKสำเนา |
| ระยะเวลานำส่งมาตรฐานของผู้ผลิต | 6 สัปดาห์ |
| รหัสสินค้า | 4061357 |
| เอกสารข้อมูลทางเทคนิค | |
| Board Type | Development Kit |
| IC / Module Used | MTi-8 |
| Application Sub Type | Accelerometer / Gyroscope / Magnetometer - Three-Axis |
| Kit Contents | Development Kit MTi-8 GNSS/INS |
| SVHC | To Be Advised |
ภาพรวมของผลิตภัณฑ์
MTI-8-0I-DK is a development kit for MTi-8-0I. It is a cm-level GNSS/INS as a 12.1 x 12.1mm module with an interface to an external GNSS receiver. The Xsens optimized strap down algorithm (Attitude Engine™) performs high-speed dead-reckoning calculations at 1KHz allowing accurate capture of high frequency motions. Xsens’ industry-leading sensor fusion algorithm provides high accuracy and sensor auto-calibration in a cost-effective module for a wide range of (embedded) applications. It relieves users from the design, integration and maintenance of gyroscopes, accelerometers and other sensors. The MTi-8 is supported by the MT software suite which includes MT Manager (GUI for Windows/Linux), SDK, example codes and drivers for many platforms including ROS.
- 0.5deg RMS roll, pitch, 1deg RMS yaw/heading, 0.05m/s RMS velocity (sensor fusion performance)
- 2000deg/s standard full range, 6deg/h in-run bias stability, 230Hz -3dB bandwidth (gyroscope)
- 16g standard full range, 40µg in-run bias stability, 230Hz -3dB bandwidth (accelerometer)
- 0.5mG total RMS noise, +/- 8G standard full range, 0.25mG resolution (magnetometer)
- UART GNSS receiver interface, high precision GNSS precision, external RTCM i/p port(GNSS receiver)
- SPI barometer interface
- IP00 IP-rating, -40 to 85°C operating temperature, output frequency up to 1KHz
- Connector:SMD, footprint compatible with JEDEC PLCC-28
- Input voltage range from 2.8 to 3.6V, power consumption (typ) of <lt/>150mW at 3V
- UART/SPI/I²C interfaces, Xbus/NMEAin protocols. built-in-self test (Gyr, Acc, Mag, Baro, GNSS)
ข้อมูลจำเพาะทางเทคนิค
| Board Type | Development Kit |
|---|---|
| Application Sub Type | Accelerometer / Gyroscope / Magnetometer - Three-Axis |
| SVHC | To Be Advised |
| IC / Module Used | MTi-8 |
|---|---|
| Kit Contents | Development Kit MTi-8 GNSS/INS |
เอกสารทางเทคนิค (1)
กฎหมายและปัจจัยแวดล้อม
| ประเทศต้นกำเนิด: ประเทศสุดท้ายที่ดำเนินกระบวนการผลิตที่สำคัญประเทศต้นกำเนิด: | Netherlands ประเทศสุดท้ายที่ดำเนินกระบวนการผลิตที่สำคัญ |
|---|---|
| หมายเลขพิกัดอัตราภาษี: | 84733020 |
| US ECCN: | 7A994 |
| EU ECCN: | NLR |
| เป็นไปตามข้อกำหนด RoHS: | ใช่ RoHS |
| การใช้สารพาทาเลตตามระเบียบ RoHS: | ใช่ RoHS |
| SVHC: | To Be Advised |
| ดาวน์โหลดหนังสือรับรองมาตรฐานของผลิตภัณฑ์ | หนังสือรับรองมาตรฐานของผลิตภัณฑ์ |
| น้ำหนัก (กก.): | .000001 |
