STMPS2252MTR

STMPS2252MTR is a power distribution switch intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. These devices incorporate 100mohm MOSFET high-side power switches for power distribution systems that require multiple power switches in a single package. Each switch is controlled by an independent logic enable input. When the output load exceeds the current limit threshold or a short is present, this device limit the output current to a safe level by switching into a constant current mode, pulling the overcurrent (OCx) logic output low. When continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures the switch remains off until valid input voltage is present.

• 500mA continuous current
• Thermal protection
• Independent short-circuit protection with overcurrent logic output
• CMOS and TTL compatible inputs
• 2.5ms typical rise time
• Undervoltage lockout, 13µA maximum standby supply current
• Ambient temperature range from -40°C to 85°C
• 8KV ESD protection
• Reverse current protection and fault blanking
• Available in a 8 pin SOIC package