TWR-56F8400

TWR-56F8400 is a stand-alone development board that can be used in conjunction with the Tower System peripheral boards, including the LV3PH motor control kit (TWR-MC-LV3PH module). The MC56F84789 comes pre-loaded with an application demonstrating the ADC and an FIR filter application that will sense heat at the four corners of the module. The module features serial I/O over USB, CAN circuits and access to each pin. The module can be powered by the Tower system, an external power supply, the USB jack or a board connected to its header. The MC56F84789 is surrounded by easy access scope probes for each pin of the device. All signals are also available on the headers for easy and neat coupling to your project. It can also be used as the main control board with an APMOTOR56F8000E motor control board.

• 32-bit digital signal controller module featuring MC56F84789 and tower compatible
• Selectable power sources: USB on 56F8400 card, Barrel CONN on 56F8400 card, tower elevator board
• Motor control board plug direct to 56F8400 card, no tower connection, plug motor control to 9V
• Filtered power for VDDA and VSSA on the 32-bit MC56F84789DSC, MC56F84789 DSC in an 100 LQFP package
• 9 LEDs controlled by the MC56F84789 DSC, optional 8MHz crystal circuit for MC56F84789 DSC
• 4 thermistors for single ended or differential analogue inputs to the MC56F84789 DSC
• Two push buttons for user input or interrupts to the MC56F84789 DSC
• MC9S08JM60 (‘JM60) MCU with a 4MHz crystal
• Open Source Debug (OSBDM/OSJTAG) circuit, BDM header for the MC9S08JM60 MCU
• Status and target power indicator LED, control of semiconductor switch to EN power to board from USB

เนื้อหา

TWR-56F8400 board with a MC56F8476 DSC, Necessary cables, DVD with IDE software, training materials and collateral, Quick start guide.