
| ผู้ผลิต | MULTICOMP PRO |
|---|---|
| หมายเลขชิ้นส่วนของผู้ผลิต | MP010754สำเนา |
| ระยะเวลานำส่งมาตรฐานของผู้ผลิต | 17 สัปดาห์ |
| รหัสสินค้า | 4062475 |
| Product Range | Multicomp Pro Filament PLA |
| หมายเลขชิ้นส่วนของคุณ | |
| เอกสารข้อมูลทางเทคนิค |
อยากได้เพิ่มใช่ไหม
| จำนวน | ราคา (ราคาสินค้าไม่รวม vat) |
|---|---|
| 1+ | THB1,380.190 |
| 5+ | THB1,329.270 |
| 10+ | THB1,304.940 |
| 25+ | THB1,281.510 |
ข้อมูลผลิตภัณฑ์
| ผู้ผลิต | MULTICOMP PRO |
|---|---|
| หมายเลขชิ้นส่วนของผู้ผลิต | MP010754สำเนา |
| ระยะเวลานำส่งมาตรฐานของผู้ผลิต | 17 สัปดาห์ |
| รหัสสินค้า | 4062475 |
| Product Range | Multicomp Pro Filament PLA |
| เอกสารข้อมูลทางเทคนิค | |
| Diameter | 1.75mm |
| Filament Colour | Natural |
| Filament Material | PLA (Polylactide) |
| Melting Temperature Min | 190°C |
| Melting Temperature Max | 270°C |
| Filament Weight | 1kg |
| Product Range | Multicomp Pro Filament PLA |
| SVHC | No SVHC (04-Feb-2026) |
ภาพรวมของผลิตภัณฑ์
MP010754 printer filament is specially developed for aeromodelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. Using active foaming technology to achieve lightweight, low-density PLA parts, the foaming volume ratio is 220%(easy to paint), and the density is as low as 0.54g/cm3(good interlayer adhesion). Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the lightweight PLA enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.
- ePLA-LW 3D printing filament, density (g/cm3) is 1.2
- Heat distortion temp (0.45MPa) is 53°C, melt flow index (g/10min) is 8.1(190°C/2.16kg)
- Density(g/cm3) is 1.2, tensile strength(MPa) is 32.2
- Fan speed is 100%, printing speed is 40mm/s to 100mm/s
- Durability is 4/10, printability is 9/10
- Free adjustment of strength and foaming ratio, excellent matte surface effect
- Excellent printability
- Recommended build surfaces is masking paper, PVP solid glue, PEI
- 1.75mm, natural, 1Kg
- Extruder temperature range from 190°C to 270°C, recommended temperature range from 45°C to 60°C
การใช้งาน
3D Printing, 3D Design, Hobby & Education, Education, Prototyping, Commercial
ข้อมูลจำเพาะทางเทคนิค
| Diameter | 1.75mm |
|---|---|
| Filament Material | PLA (Polylactide) |
| Melting Temperature Max | 270°C |
| Product Range | Multicomp Pro Filament PLA |
| Filament Colour | Natural |
|---|---|
| Melting Temperature Min | 190°C |
| Filament Weight | 1kg |
| SVHC | No SVHC (04-Feb-2026) |
เอกสารทางเทคนิค (1)
กฎหมายและปัจจัยแวดล้อม
| ประเทศต้นกำเนิด: ประเทศสุดท้ายที่ดำเนินกระบวนการผลิตที่สำคัญประเทศต้นกำเนิด: | China ประเทศสุดท้ายที่ดำเนินกระบวนการผลิตที่สำคัญ |
|---|---|
| หมายเลขพิกัดอัตราภาษี: | 39169090 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| เป็นไปตามข้อกำหนด RoHS: | ใช่ RoHS |
| การใช้สารพาทาเลตตามระเบียบ RoHS: | ใช่ RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| ดาวน์โหลดหนังสือรับรองมาตรฐานของผลิตภัณฑ์ | หนังสือรับรองมาตรฐานของผลิตภัณฑ์ |
| น้ำหนัก (กก.): | 1 |
