MAX713CSE+.

The MAX713CSE+ is a NiCd/NiMH battery Fast-charge Controller. The MAX713 fast-charge nickel metal hydride (NiMH) and nickel cadmium (NiCd) batteries from a DC source at least 1.5V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analogue-to-digital converter, timer and temperature window comparator determine charge completion. The MAX713 is powered by the DC source via an on-board +5V shunt regulator. They draw a maximum of 5μA from the battery when not charging. A low-side current-sense resistor allows the battery charge current to be regulated while still supplying power to the battery's load.

• Fast-charge NiMH or NiCd batteries
• Voltage slope, temperature and timer fast-charge cut-off
• Charge 1 to 16 series cells
• Supply battery's load while charging (linear mode)
• Fast charge from C/4 to 4C rate
• C/16 Trickle-charge rate
• Automatically switch from fast to trickle charge
• Linear mode power control
• 5µA Maximum drain on battery when not charging
• 5V Shunt regulator powers external logic

การใช้งาน

Computers & Computer Peripherals, Consumer Electronics, Portable Devices