35158

The Kitronik 35158 is a round RGB LED light module that is designed for use in low-power lighting projects. The circular board design is compact and discreet, allowing it to be easily integrated into most enclosures. The five RGB LEDs are evenly placed on a 72° separation around the centre hole. The module is powered via the micro USB connector and has been designed so that power requirements are within the supply rating of a computer USB port (under 100mA), meaning it can be conveniently powered from a computer, laptop or a suitable USB power supply. The onboard switch is used to step between patterns and turn off the LEDs, and a remote switch can be connected in parallel with the PCB switch to allow remote mounting within an enclosure.

• Low-power lighting module that can be easily integrated into a custom enclosure
• Five full-colour RGB LEDs with 4 user selectable patterns
• Single push-button interface to step through patterns
• Circular module design with flat underside allows for simple enclosure designs
• Single central M3 mounting hole for easy mounting
• Compact design is just 36mm in diameter (USB connector projects approximately 2mm from the end of the PCB)
• Board is powered via the Micro USB port
• Current draw is typically 60mA at 5V (peak is under 90mA)
• Dimensions (HxDia.): 10x36mm

เนื้อหา

USB RGB LED lamp module

บันทึก

Note: If adding a remote switch, it should be momentary, normally open. The use of a non-momentary switch may result in unpredictable operation.