
| ผู้ผลิต | IST INNOVATIVE SENSOR TECHNOLOGY |
|---|---|
| หมายเลขชิ้นส่วนของผู้ผลิต | FS1.A.1L.195สำเนา |
| รหัสสินค้า | 1266953 |
| Product Range | FS1 Series |
| หมายเลขชิ้นส่วนของคุณ | |
| เอกสารข้อมูลทางเทคนิค |
ข้อมูลผลิตภัณฑ์
| ผู้ผลิต | IST INNOVATIVE SENSOR TECHNOLOGY |
|---|---|
| หมายเลขชิ้นส่วนของผู้ผลิต | FS1.A.1L.195สำเนา |
| รหัสสินค้า | 1266953 |
| Product Range | FS1 Series |
| เอกสารข้อมูลทางเทคนิค | |
| Sensor Type | Flow Sensor |
| Flow Rate Min | - |
| Flow Rate Max | - |
| Operating Pressure Min | - |
| Operating Pressure Max | - |
| Supply Voltage Min | 2V |
| Supply Voltage Max | 5V |
| Accuracy % | 3% |
| Accuracy | ± 3% |
| Media Type | Gas |
| Process Connection Size | - |
| Process Connection Type | - |
| Pipe Size | - |
| Sensor Mounting | Cable |
| Operating Temperature Min | -30°C |
| Operating Temperature Max | 150°C |
| Product Range | FS1 Series |
| SVHC | No SVHC (15-Jun-2015) |
| Supply Voltage DC Max | 5V |
| Supply Voltage DC Min | 2V |
ภาพรวมของผลิตภัณฑ์
The FS1 series Flow Sensor Element that consists of two temperature depending platinum-resistors, both deposited on one chip. The low-ohm resistor with a small area is used as a heater, whereas the other high-Ω resistor serves to measure the reference temperature. Using a bridge circuit, the differing resistance value of two elements leads to different (self) heating. The (self) heating is dependent upon the applied voltage, the mass flow and the media in which the sensor is located. Higher voltage increases self heating, a higher flow rate increases cooling. If the self heating is kept constantly by a suitable controller, the voltage increases with higher flow rates and therefore becomes a measure for the mass flow. As a result of his little thermal mass, this sensor has fast heating and cooling response times. The measuring principle of the sensor can be used for large operation ranges, from 0 to 0.1 up to 100m/s.
- Easy adaptable for different applications or into housings
- Simple signal processing and calibration
- No mechanical moved components
- Excellent reproducibility
- Excellent long-term stability
- Thermal measuring principle
- 0 to 100m/s Measuring range
- 0.01m/s Response sensitivity
- <lt/>3% current measuring value accuracy
- 3-pin Leads AWG30, insulated with PTFE or custom specific electrical connection
การใช้งาน
Sensing & Instrumentation, HVAC, Automotive, Medical, Automation & Process Control, Industrial
ข้อมูลจำเพาะทางเทคนิค
| Sensor Type | Flow Sensor |
|---|---|
| Flow Rate Max | - |
| Operating Pressure Max | - |
| Supply Voltage Max | 5V |
| Accuracy | ± 3% |
| Process Connection Size | - |
| Pipe Size | - |
| Operating Temperature Min | -30°C |
| Product Range | FS1 Series |
| Supply Voltage DC Max | 5V |
| Flow Rate Min | - |
|---|---|
| Operating Pressure Min | - |
| Supply Voltage Min | 2V |
| Accuracy % | 3% |
| Media Type | Gas |
| Process Connection Type | - |
| Sensor Mounting | Cable |
| Operating Temperature Max | 150°C |
| SVHC | No SVHC (15-Jun-2015) |
| Supply Voltage DC Min | 2V |
เอกสารทางเทคนิค (1)
กฎหมายและปัจจัยแวดล้อม
| ประเทศต้นกำเนิด: ประเทศสุดท้ายที่ดำเนินกระบวนการผลิตที่สำคัญประเทศต้นกำเนิด: | Switzerland ประเทศสุดท้ายที่ดำเนินกระบวนการผลิตที่สำคัญ |
|---|---|
| หมายเลขพิกัดอัตราภาษี: | 90268020 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| เป็นไปตามข้อกำหนด RoHS: | ใช่ RoHS |
| การใช้สารพาทาเลตตามระเบียบ RoHS: | จะแจ้งให้ทราบ |
| SVHC: | No SVHC (15-Jun-2015) |
| ดาวน์โหลดหนังสือรับรองมาตรฐานของผลิตภัณฑ์ | หนังสือรับรองมาตรฐานของผลิตภัณฑ์ |
| น้ำหนัก (กก.): | .013745 |
