DK-45605
Development Kit, ICM‑45605, 6-Axis Motion Sensor, On-Board Debugger, Embedded Motion Drivers

| ผู้ผลิต | TDK INVENSENSE |
|---|---|
| หมายเลขชิ้นส่วนของผู้ผลิต | DK-45605สำเนา |
| ระยะเวลานำส่งมาตรฐานของผู้ผลิต | 54 สัปดาห์ |
| รหัสสินค้า | 4572494 |
| หมายเลขชิ้นส่วนของคุณ | |
| เอกสารข้อมูลทางเทคนิค |
อยากได้เพิ่มใช่ไหม
| จำนวน | ราคา (ราคาสินค้าไม่รวม vat) |
|---|---|
| 1+ | THB4,323.490 |
ข้อมูลผลิตภัณฑ์
| ผู้ผลิต | TDK INVENSENSE |
|---|---|
| หมายเลขชิ้นส่วนของผู้ผลิต | DK-45605สำเนา |
| ระยะเวลานำส่งมาตรฐานของผู้ผลิต | 54 สัปดาห์ |
| รหัสสินค้า | 4572494 |
| เอกสารข้อมูลทางเทคนิค | |
| Board Type | Development Kit |
| IC / Module Used | ICM-45605 |
| Application Sub Type | 6-Axis Motion Sensor |
| Kit Contents | On-Board Debugger, InvenSense Motion Link Software, GUI Based Dev Tool & Embedded Motion Drivers |
| SVHC | No SVHC (25-Jun-2025) |
ภาพรวมของผลิตภัณฑ์
DK-45605 is a development kit for ICM‑45605 motion tracking device. This is a comprehensive development platform for ICM‑45605, a high performance 6‑axis motion sensor that combines a 3‑axis gyroscope, and a 3‑axis accelerometer. The platform, designed around Microchip G55 MCU can be used by developers for rapid evaluation and development of ICM‑45605 based solutions. The DK‑45605 includes an on-board Embedded Debugger so external tools are not required to program or debug the G55 MCU. The platform supports Atmel Studio and is compatible with Microchip Xplained Pro Extension boards. Xplained Pro extension series evaluation kits offer additional peripherals to extend the features of the board and ease the development of customer designs. Included Embedded Motion Drivers (eMD) consist of a set of APIs to configure various aspects of the platform including motion sensor parameters such as FSR, ODR signal redirection to dedicated pin, sensors low pass filter cutoff or alarm bits check.
- Integrated TDK InvenSense motion sensor
- Support for a magnetic sensor with plug in daughter boards (DB)
- Microchip SAMG55 microcontroller with 512KB flash
- On-board Embedded debugger (EDBG) for programming and debugging
- Built in FTDI USB to UART interface for fast motion sensor data transfer
- USB connectors for host interface to software debug and data logging
- Board power supply through USB
เนื้อหา
Development board, Necessary software including InvenSense Motion Link, a GUI based development tool and embedded Motion Driver for ICM‑45605.
บันทึก
The board is intended for basic sensor product evaluation and software development at room temperature. This board is not designed to be used at any other temperature.
ข้อมูลจำเพาะทางเทคนิค
| Board Type | Development Kit |
|---|---|
| Application Sub Type | 6-Axis Motion Sensor |
| SVHC | No SVHC (25-Jun-2025) |
| IC / Module Used | ICM-45605 |
|---|---|
| Kit Contents | On-Board Debugger, InvenSense Motion Link Software, GUI Based Dev Tool & Embedded Motion Drivers |
เอกสารทางเทคนิค (1)
กฎหมายและปัจจัยแวดล้อม
| ประเทศต้นกำเนิด: ประเทศสุดท้ายที่ดำเนินกระบวนการผลิตที่สำคัญประเทศต้นกำเนิด: | Taiwan ประเทศสุดท้ายที่ดำเนินกระบวนการผลิตที่สำคัญ |
|---|---|
| หมายเลขพิกัดอัตราภาษี: | 84733020 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| เป็นไปตามข้อกำหนด RoHS: | ใช่ RoHS |
| การใช้สารพาทาเลตตามระเบียบ RoHS: | จะแจ้งให้ทราบ |
| SVHC: | No SVHC (25-Jun-2025) |
| ดาวน์โหลดหนังสือรับรองมาตรฐานของผลิตภัณฑ์ | หนังสือรับรองมาตรฐานของผลิตภัณฑ์ |
| น้ำหนัก (กก.): | .000001 |
