HT12F

The HT12F is a remote control Decoder IC for proper operation, a pair of encoder/decoder with the same number of addresses and data format should be chosen. The 12¹² encoder receive serial addresses and data from a programmed this series of encoder that is transmitted by a carrier using an RF or an IR transmission medium. It compares the serial input data three times continuously with its local addresses. If no error or unmatched codes is found, the input data code is decoded and then transferred to the output pin. The VT pin also goes high to indicate a valid transmission.

• Low power and high noise immunity CMOS technology
• Low standby current
• Capable of decoding 12 -bit of information
• Binary address setting
• Received codes are checked 3 times
• Built-in oscillator needs only 5% resistor
• Valid transmission indicator
• Easy interface with an RF or an infrared transmission medium
• Minimal external components

การใช้งาน

Security, Communications & Networking, Consumer Electronics