พิมพ์หน้า
ภาพใช้เพื่อวัตถุประสงค์เพื่อแสดงตัวอย่างเท่านั้น โปรดดูรายละเอียดของผลิตภัณฑ์

| ผู้ผลิต | COMUS |
|---|---|
| หมายเลขชิ้นส่วนของผู้ผลิต | RBS040100สำเนา |
| ระยะเวลานำส่งมาตรฐานของผู้ผลิต | 9 สัปดาห์ |
| รหัสสินค้า | 2409212 |
| หมายเลขชิ้นส่วนของคุณ | |
| เอกสารข้อมูลทางเทคนิค |
734 ในสต็อก
อยากได้เพิ่มใช่ไหม
734 จัดส่งใน 3-4 วันทำการ(อังกฤษ สต็อก)
| จำนวน | ราคา (ราคาสินค้าไม่รวม vat) |
|---|---|
| 1+ | THB64.570 |
| 10+ | THB54.850 |
| 25+ | THB51.060 |
| 50+ | THB50.210 |
| 100+ | THB49.360 |
| 500+ | THB47.780 |
| 1000+ | THB46.310 |
ราคาสำหรับสินค้า:Each
ขั้นต่ำ: 1
หลายรายการ: 1
THB64.57
บันทึกของรายการ
เพิ่มไปยังใบยืนยันคำสั่งซื้อ ใบแจ้งหนี้ และใบจัดส่งสินค้าสำหรับคำสั่งซื้อนี้เท่านั้น
ข้อมูลผลิตภัณฑ์
| ผู้ผลิต | COMUS |
|---|---|
| หมายเลขชิ้นส่วนของผู้ผลิต | RBS040100สำเนา |
| ระยะเวลานำส่งมาตรฐานของผู้ผลิต | 9 สัปดาห์ |
| รหัสสินค้า | 2409212 |
| เอกสารข้อมูลทางเทคนิค | |
| Sensor Body Material | Nylon 6.6 (Polyamide 6.6), Glass Filled |
| Beam Angle | 10° |
| Output Current | 25mA |
| Switching Voltage | 24V |
| Product Range | - |
| SVHC | No SVHC (23-Jan-2024) |
ภาพรวมของผลิตภัณฑ์
The RBS040100 from Comus is a tilt switch with mercury free contacts. These operate when tilted from the horizontal position. The switch movement required to cause contact change is called the differential angle. It is very important when designing a tilt switch to allow for the differential angle and understand that when in the horizontal position the switch contact may be open or closed.
- Maximum switching voltage is 24V
- Maximum switching current is 25mA
- 14.5mm length
- 5mm diameter
- Maximum contact resistance is 5ohm initially
- Operating temperature range from -25° to 70°C
- Glass fibre polyamide, UL94V-0 case material
- Pin termination
- Make angle is 10° below horizontal, break angle is 10° above horizontal and 15°differential angle
การใช้งาน
Industrial, Consumer Electronics, Portable Devices
บันทึก
When cutting or bending switch leads it is impotant that the glass seal is not damaged. The cutting or bending point should be no closer than 3mm to the glass to metal seal.
ข้อมูลจำเพาะทางเทคนิค
| Sensor Body Material | Nylon 6.6 (Polyamide 6.6), Glass Filled |
|---|---|
| Output Current | 25mA |
| Product Range | - |
| Beam Angle | 10° |
|---|---|
| Switching Voltage | 24V |
| SVHC | No SVHC (23-Jan-2024) |
เอกสารทางเทคนิค (1)
กฎหมายและปัจจัยแวดล้อม
| ประเทศต้นกำเนิด: ประเทศสุดท้ายที่ดำเนินกระบวนการผลิตที่สำคัญประเทศต้นกำเนิด: | Taiwan ประเทศสุดท้ายที่ดำเนินกระบวนการผลิตที่สำคัญ |
|---|---|
| หมายเลขพิกัดอัตราภาษี: | 85365007 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| เป็นไปตามข้อกำหนด RoHS: | ใช่ RoHS |
| การใช้สารพาทาเลตตามระเบียบ RoHS: | ใช่ RoHS |
| SVHC: | No SVHC (23-Jan-2024) |
| ดาวน์โหลดหนังสือรับรองมาตรฐานของผลิตภัณฑ์ | หนังสือรับรองมาตรฐานของผลิตภัณฑ์ |
| น้ำหนัก (กก.): | .000541 |
