LTM4614IV#PBF

LTM4614 is a complete 4A dual output switching mode step-down µModule® regulator. Included in the package are the switching controllers, power FETs, inductors and all support components. This dual 4A DC/DC converter operate over an input voltage range of 2.375V to 5.5V. It supports output voltages ranging from 0.8V to 5V. This regulator output voltages are set by a single resistor for each output. Only bulk input and output capacitors are needed to complete the design. Additional features include overvoltage protection, foldback overcurrent protection, thermal shutdown and programmable soft-start. It is widely used in application such as telecom and networking equipment, FPGA power, SERDES and other low noise applications etc.

• Total DC output error is ±2% maximum
• Output voltage tracking, upto 95% efficiency
• Power good indicators
• 5A peak output current
• Output ripple voltage is 12mVP-P typ at (IOUT = 0A, COUT = 100µF (X5R), VIN = 5V, VOUT = 1.5V)
• Input supply bias current is 20mA typ at (VIN = 2.375V, VOUT = 1.5V, switching continuous)
• Undervoltage lockout threshold is 2V typ at (IOUT = 0A, TA = 25°C, VIN = 5V)
• Operating temperature is -40°C to 125°C
• Package style is 144-lead LGA

บันทึก

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party