LTC4313IMS8-2#PBF

LTC4313-2 is a hot swappable 2-wire bus buffer that provides bidirectional buffering while maintaining a low offset voltage and high noise margin upto 0.3VCC. The high noise margin allows the device to be interoperable with devices that drive a high VOL (<gt/>0.4V) and allows multiple device to be cascaded. During insertion, the SDA and SCL lines are pre-charged to 1V to minimize bus disturbances. Connection is established between the input and output after ENABLE is asserted high and a stop bit or bus idle condition has been detected on the SDA and SCL pins. It is widely used in application such as capacitance buffers/bus extender, live board insertion, telecommunications systems including ATCA, level translation, PMBus, servers etc.

• Compatible with non-compliant I²C devices that drive a high VOL
• Stuck bus disconnect and recovery
• Compatible with I²C, I²C fast mode and SMBus
• ±4kV human body model ESD ruggedness
• High impedance SDA, SCL pins when unpowered
• Input supply voltage is 2.9V to 5.5V, level shift 3.3V and 5V busses
• Input supply current is 3.5mA typ at (VENABLE = 0V, VCC = 5.5V, VSDAIN,SCLIN = 0V)
• Minimum slew rate requirement is 0.2V/µs typ
• Operating temperature is –40°C to 85°C
• Packaging style is 8-lead plastic MSOP

บันทึก

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party