LTC2872IUHF#PBF

LTC2872 is a robust pin-configurable transceiver that supports RS232, RS485, and RS422 standards while operating on a single 3V to 5.5V supply. It can be configured as four RS232 single-ended transceivers or two RS485 differential transceivers, or combinations of both, on shared I/O lines. Pin-controlled integrated termination resistors allow for easy interface reconfiguration, eliminating external resistors and control relays. Half-duplex switches allow four-wire and two-wire RS485 configurations. Loopback mode steers the driver inputs to the receiver outputs for diagnostic self-test. The RS485 receivers support upto 256 nodes per bus, and feature full failsafe operation for floating, shorted or terminated inputs. It is widely used in application such as flexible RS232/RS485/RS422 interface, software selectable multiprotocol interface ports, point-of-sale terminals, cable repeaters, protocol translators, PROFIBUS-DP networks etc.

• Maximum data rate is 20Mbps minimum at (RS485 AC characteristics)
• Maximum data rate is 500Kbps minimum at (RS232 AC characteristics)
• Terminating resistor is 120 Ohm typical at (RS485 receiver, TE485 = VL, A–B = 2V, B = -7V, 0V, 10V)
• Logic loopback mode
• High ESD: ±16KV on line I/O
• Logic interface is 1.7V to 5.5V
• Supports upto 256 RS485 nodes
• RS485 receiver full failsafe eliminates UART lockup
• Operating temperature is -40°C to 85°C
• Package style is 38-lead plastic QFN

บันทึก

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party