LTC1344AIG#PBF

LTC1344A is a software-selectable cable terminator. It features six software-selectable multiprotocol cable terminators. Each terminator can be configured as an RS422 (V.11) 100 ohm minimum differential load, V.35 T-network load or an open circuit for use with RS232 (V.28) or RS423 (V.10) transceivers that provide their own termination. When combined with the device forms a complete software-selectable multiprotocol serial port. A data bus latch feature allows sharing of the select lines between multiple interface ports. software-selectable cable termination for: RS232 (V.28), RS423 (V.10), RS422 (V.11), RS485, RS449, EIA530, EIA530-A, V.35, V.36, X.21. It is used in applications such as data networking, CSU and DSU, data routers.

• Outputs won’t load the line with power off
• Supply current is 0.4mA typical at (VCC = 5V ±5%)
• Differential mode impedance is 104 ohm typical at (VCC = 5V ±5%)
• Input high voltage is 2V minimum at (VCC = 5V ±5%)
• Input low voltage is 0.8V maximum at (VCC = 5V ±5%)
• Input current is ±10µA maximum at (VCC = 5V ±5%)
• Operating temperature range from -40°C to 85°C
• Package style is 24-lead plastic SSOP

บันทึก

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party