LT1006S8#PBF

LT1006 is a precision, single supply op-amp. Its design has been optimized for single supply operation with a full set of specifications at 5V. Specifications at ±15V are also provided. The LT1006 has a low offset voltage of 20µV, drift of 0.2µV/°C, offset current of 120pA, gain of 2.5 million, common mode rejection of 114dB and power supply rejection of 126dB. Although supply current is only 340µA, a novel output stage can source or sink in excess of 20mA while retaining high voltage gain. Common mode input range includes ground to accommodate low ground-referenced inputs from strain gauges or thermocouples, and output can swing to within a few millivolts of ground. Application includes low power sample-and-hold circuits, battery powered precision instrumentation, strain gauge signal conditioners, thermocouple amplifiers, 4mA to 20mA current loop transmitters, active filters.

• Single supply operation, input voltage range extends to ground
• Output swings to ground while sinking current
• 80µV typical input offset voltage (VS = 5V, VCM = 0V, VOUT = 1.4V, TA = 25°C)
• 0.7µV/Mo typ long-term input offset voltage stability (VS = 5V, VCM = 0V, VOUT = 1.4V, TA = 25°C)
• 8 plastic lead SO package, operating temperature range from 0°C to 70°C

บันทึก

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party