MT29F8G08ABACAH4-IT:C

MT29F8G08ABACA is a NAND flash memory. NAND flash device include an asynchronous data interface for high-performance I/O operations. This device use a highly multiplexed 8-bit bus (I/Ox) to transfer commands, address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#. Additional signals control hardware write protection and monitor device status (R/B#). This hardware interface creates a low pin-count device with a standard pinout that remains the same from one density to another, enabling future upgrades to higher densities with no board redesign.

• Single-level cell (SLC) technology, asynchronous I/O performance
• Array performance, program page is 200µs (typical)
• Command set is ONFI NAND flash protocol, advanced command set
• Program page cache mode, read page cache mode, one-time programmable (OTP) mode
• Operation status byte provides software method for detecting, operation completion
• Pass/fail condition, write-protect status, quality and reliability
• RESET (FFh) required as first command after power-on
• 8Gb density, 8bit device width, SLC level
• 3.3V (2.7–3.6V) operating voltage, asynchronous interface
• 63-ball VFBGA (9 x 11 x 1.0mm) package, industrial operating temperature range from –40°C to +85°C