PR100272

PR100272 is a RevPi compact programmable logic controller. It features interfaces including 2 x RJ45 10/100 Ethernet (each with separate MAC addresses), 4 x USB A ports (with a maximum total current draw of 2 A), 1 x RS485 (up to 500 kbps, software-switchable termination, not galvanically isolated), 1 x Micro-USB (exclusively for image transfer to eMMC), and 1 x HDMI. Digital output type includes high-side with 10 k pull down resistor, short-circuit proof (internal temperature switch-off), potential separation system/digital outputs.

• DIN rail housing (for DIN rail version EN 50022), polycarbonate material
• Power supply range from 10.8 to 28.8VDC, 20W max power consumption
• 2-, 4- and 8-pole screw type terminal connector, 10mA (10VDC at 1k) max current load of analogue o/p
• Broadcom BCM2837B0 quad-core ARM Cortex A53 processor
• 1.2GHz clock rate, passive with heat sink processor cooling
• 1GB RAM, 8GB flash memory, 2kB EERAM persistent memory
• 8 no. of digital input channel, Via GPIOs and process image software interface of i/p and o/p
• 24VDC input voltage
• Operating temperature range from -20°C to +55°C
• Housing dimensions (H x W x D) is 90 x 160.6 x 58mm