AM26LV32EIDR

The AM26LV32EIDR is a quadruple differential Line Receiver with 3-state outputs. This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 drivers with reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32MHz. The 3-state outputs permit connection directly to a bus-organized system. The AM26LV32E has an internal fail-safe circuitry that prevents the device from putting an unknown voltage signal at the receiver outputs. In the open fail-safe, shorted fail-safe and terminated fail-safe, a high state is produced at the respective output. This receiver is supported for partial-power-down applications using Ioff. Ioff circuitry disables the outputs, preventing damaging current back-flow through the device when it is powered down.

• Meets or exceeds standards TIA/EIA-422-B and ITU recommendation V.11
• ESD protection for RS422 bus pins
• IOFF supports partial power-down-mode operation
• 27mW Typical low power dissipation
• Open circuit, short-circuit and terminated fail-safe
• 35mV Typical input hysteresis
• Green product and no Sb/Br

การใช้งาน

Automotive, Motor Drive & Control

คำเตือน

This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.